Card Vibro Air2

[Note]

To use Version 1.6.5 or later, please update the firmware of your Air2 to Ver:124.

You can download the latest firmware from the URL below:

http://www.imv.co.jp/products/vibrograph/measure/air2/info01/index.php

Card Vibro Air2 is a WiFi portable vibrometer.

With the wireless connection, we can now safely measure the vibration of the

areas that had been difficult to access.

This vibrometer has the following functions:

1. Simultaneous Measurement - Displacement, velocity, acceleration, and

acceleration envelope for bearing assessment can be measured automatically

and simultaneously.

2. FFT Analysis - Frequency analysis can be done in the 12800dpi high

resolution.

3. Waveform Observation - Waveform of the vibration can be recorded.

4. Evaluation at the Site - Evaluation can be done according to the

international standards; vibration severity ISO10816 (JIS-B-0906), etc.

5. Continuous Monitoring - Waveform and FFT can be monitored in almost

real-time.

6. Route Setting - Measuring points are displayed in the order of being

programmed.

7. Data Saving - All data acquired can be stored.

Caution: A specific hardware is necessary to use this software.