Billiard Table Design

Billiard is a sport that falls into the category of concentration sport The billiard players are required to enter the billiard balls that are on the billiard table Generally billiard table is rectangular and has 6 holes Below is Billyard Table Size by table type

1. Cari Billiard Table

The surface of the table for the Carom billiard has a length of 2.84 meters and a width of 1.42 meters; with a 5 mm clearance. Generally the height of this table is 75 - 80 cm. On this side of the table there were no holes. The plinth board has a thickness of 45 mm and is often heated to 5 ° C above room temperature, to keep the board moist so that the ball can scroll and bounce steadily. Thus the billiard game will be more quickly completed. The tradition of heating the base board of this game has actually been done from (1819 - 1901) and always heats up billiard board using tin pipe

2. Billiard Pool Table

Table with 6 pieces of holes at the edge of this formerly only has 4 corner holes. But as the billiard progressed, two additional holes were made to make the game more interesting. The tables for billiard type pools come in different sizes. However, this table is usually measuring 2.7 meters long, 2.4 meters, or 2.1 meters with each 2: 1 ratio with the width of each country using different table sizes

The holes on the table are usually lined with cloth, leather, or plastic. The size of this hole adjusts the size of the billiard balls, with a diameter between 51 - 57 mm Billiards pool game board has a thickness of more than 2.5 cm.

Materials used for different billiards The best quality usually uses granite or thick slabs on the tabletop surface, which serves to prevent uneven surfaces or the appearance of bulges or other disturbing forms as weather and air humidity

The surface of the table, in general, is then matched with a special cloth called a green billiard cloth. Although in its development many also use the color red, blue, or other colors with a variety of patterns also Billiard table consists of 4 main components namely the pads board where the game cloth cover board and marker.

Bearings - Cushions alias pads are located inside the edge of the table Cushions are made of various materials and designs Generally the pads are made of synthetic rubber The function of this component is to prevent the billiard balls bouncing hard when in the shovel and hit the edge of the table