Kind Knot Design

The node is a connection between the rope with rope

In ropes we often confuse between the ropes, knots and ties. It is actually totally different. Tali is the object, the node is a connection between the rope with a rope while the bond is the relationship between the ropes with other objects, such as wood, beams, etc. His bamboo.

Here are some nodes that are widely used by a Boy Scout.

1. The end of the rope knot rope spun the point that at the end of the rope is not easily separated, it can also be used to connect two pieces of bamboo.

2. Node dead point to connect two ropes as large and not slippery, but it can also be used to terminate a bond for bonding is not slack.

3. The node life pointless to tie the pole and easily remove the back.

4. knot woven single use to connect two ropes are not as big and dry

5. knot woven double-point to connect two ropes are not as big and wet

6. The tight knot point to shorten the rope without cutting

close

7. knot twins point to connect two ropes as large and slick / wet

8. The node chair Use to lift or lower objects or people fainting

9. knot puller to pull a fairly large object

10. lasso knot point to ensnare.

11. Node base is the most important node in a bind and if we want to create a profile of the building. The usefulness of the base node is to start and end a bond.

12. Node pole is the node that has properties that remain and will not slack even withdrawn, therefore knot pole is often used to bind the animal's neck so that it can move freely and not choke.

13. knot to tie the anchor point anchor or other objects shaped ring, but easy to release it. It can also be used to make an emergency stretcher.

14. knot mooring used to drag beams and even there is also used to initiate a bond, especially when creating crosslinks / crossbar.

15. The knot pull usually in use to tether strap on the animal and then easy to open her back. Can also to descend into the abyss or trees etc.

and many more knots.

see below.