Easy Tie Dye Halloween

There’s nothing scary about this Halloween Wreath, especially because you can whip it up in less than an hour. And, you’ll find many of the supplies at the dollar store. Score!

Completion time – Less than 1 hour

Materials

STYROFOAM Brand Foam

STYROFOAM™* Brand Foam: 12” x 2” wreath

*Sold under the name Make It: Fun® Foam

Other Materials

Craft bandana or ¼ yd fabric, orange tie-dye print

Silk gerbera daisies, two black and one orange/yellow

Wiggle eyes: 1”, four; ½”, two

Stuffed raven

Spider webbing

Low-temp glue gun

Tools

Scissors

Iron

Ironing board

Straight pins

Wire knippers

Optional: Rotary cutter & cutting matt

Instructions

1. Press bandana, removing wrinkles. With scissors or rotary cutter, cut hemmed edge off all four sides. Cut bandana into 1-1/4” wide strips. You will need approximately 12 strips; the final number may vary depending on high tightly you wrap the wreath.

2. Pin and glue one end of a fabric strip to the back of the wreath, and wrap the strip around the wreath; pin and glue other end of strip to the back of the wreath. Repeat, pinning and wrapping fabric strips around the wreath, until wreath is covered.

5. Cut stems from gerbera daisies. Glue daisies to the front of the wreath between 3:00 and 6:00 positions.

6. Carefully remove legs from raven. Glue raven to the top of wreath around the 11:00 position.

7. Glue two, 1” wiggle eyes between 10:00 and 11:00 on the front of the wreath.

8. Glue 1” wiggle eyes to the centers of the black gerbera daisies and two, ½” wiggle eyes to the orange & yellow gerbera daisy.

9. Carefully spread apart a small portion of spider webbing and stretch across the back of the wreath. Pin and glue in place.

10. Tie another strip of bandana through the top of the wreath for a hanger

for further information and detail tutorial, download this application now and you will have what you want.

please enjoy this tutorial and give us any feedback.