VBE GEO ALARM PRO

This simple to use Application, uses Auto Calibration to Detect Movement by Disturbance / Vibration.

Basically, you set your Device at any angle in any location.

Press START ALARM.

You have 5 seconds to move away from the Device. ( You will Hear an Alert sound for each second )

Once Calibration is Completed, Your device will now act as a Disturbance Alarm.

To check your Alarm. Simple Tap an Area near the Device. The Alarm will trigger.

IMPORTANT:

Always set your Brightness and Volume, prior to Pressing the START ALARM button.

Both Controls are sliders on the app.

Mute, Mutes all sounds plus slides the Volume Slider to 0.

Sliding the volume slider up, disables Mute.

RESET:

Once an ALARM has been activated. It will continue to go off, until you press RESET or POWER OFF.

To RESET the Alarm. Press RESET, then Press the START ALARM, button.

MOVING TO A NEW LOCATION:

If you move the Device. Press RESET or POWER OFF Button.

Set up your device at your desired angle or flat.

Press the START ALARM button.

You have 5 seconds to move away from the Device. ( You will Hear an Alert sound for each second )

Once Calibration is Completed, Your device will now act as a Disturbance Alarm.

THANK YOU, AND ENJOY: Rickyvb