How To Make Drone And Robot

드론 그리고 로봇을 만드는 방법

So you’re looking to get into drones and UAVs? This tutorial series is designed to help you understand the emerging field of UAVs and guide you through the process of building your own UAV using off-the shelf parts. The terminology and definitions used here are intended to give you, the reader an understanding of each t

ARF “Almost Ready to Fly“: a UAV which comes assembled with almost all parts necessary to fly. Components like the controller and receiver may not be included.

BNF “Bind and Fly“; the UAV comes fully assembled and includes a receiver. You only need to choose a compatible transmitter and “bind” it to the receiver.

DIY “Do It Yourself“, which is now commonly used to mean “custom”. This normally involves using parts from a variety of different suppliers and creating or modifying parts.

Drone This is synonymous with UAV. The term “drone” seems to be more common for military use whereas “UAV” is more common for hobby use

Hexacopter

A UAV which has six motors / propellers.

Multirotor “Multirotor” simply means an aircraft with multiple rotors

Octocopter A UAV which has eight motors / propellers.

Quadcopter A UAV which has four motors / propellers and four support arms. Configurations are normally “+” (the front of the UAV faces one of the arms) or “X” (the front of the aircraft faces between two arms).

RTF “Ready To Fly“: a UAV which comes fully assembled with all necessary parts. Simply charge the battery and fly!

Size (mm) “Size” is normally provided in millimeters (ex 450mm) and represents the greatest point to point distance between two motors on a UAV. Size can also determine the “class” of UAV (micro, mini etc)

Spyder A “Spyder” type UAV (normally quad or hex) is one where the supporting arms are not symmetric in bot haxes when looked at from the top.

Tricopter A UAV which has three motors / propellers, and usually three support arms

UAV “Unmanned Aerial Vehicle” (of any kind)

V-Tail A UAV which has four arms, of which the rear two are at an angle to form a ‘V’

X4 / X8 X4 and X8 are UAV configurations with four support arms; X4 configurations have one motor at the end of each arm, whereas X8 have two motors per arm (one facing up, the other facing down)

Y3 / Y6 Y3 and Y6 are UAV configurations with three support arms; Y3 configurations have one motor at the end of each arm, whereas Y6 have two motors per arm (one facing up, the other facing down)