GPS DrivingRecorder Archive

It is an application that records GPS position information and running data such as speed,acceleration,roll,pitch,temperature,humidity,road surface temperature,weather,road surface condition,pressure,setting information for motor sports.The usage is here .. The recorded data can be checked on the viewer by combining the running trajectory with information such as speed,acceleration,pitch and roll.For temperature,humidity,and weather,weather information can be obtained and automatically set using the Internet(OpenWeatherMAP API key must be obtained).The temperature and humidity can be set automatically in cooperation with the SwitchBot thermo-hygrometer.It can be edited directly by clicking on temperature,humidity,road surface temperature,weather,road surface condition,and pressure.By connecting an external GPS sensor other than the built-in GPS as a mock location service,it is possible to record a driving track with higher accuracy than the built-in GPS.To select a course,click Course to display the course selection screen,so select the course.Course registration is required in advance.When registering a course,you can shoot and record using the course name and the built-in camera.To register the setting information,click to display the parts selection screen,so select Parts.By clicking the Parts added as the setting information,the setting information can be registered.Parts to be added as setting information need to be registered in advance.Click the to register,modify,or delete courses and parts on the Parts&Course screen.On the Parts & Course screen,you can register a new course or parts by clicking and .

①Click the course, temperature (TEMP), road temperature (ROAD), road surface condition, humidity (RH), barometric pressure (AP), and weather to enter.

If it is linked with OpenWeatherMAP or SwitchBot thermo-hygrometer, it will be set automatically, so you only need to enter the part to be changed.

②Click Set offset (Since the current smartphone installation status is recorded, it is OK only at the time of installation)

③To use the pseudo location service, click the (start the mock location service).

④Click the REC button to start measurement.

⑤Click the STOP button to end the measurement.

⑥Click the driving data to display the driving data confirmation screen.

On the confirmation screen, graphs of temperature, humidity, road surface temperature, weather, road surface condition, barometric pressure, setting information, running locus, speed, acceleration, pitch and roll during running are displayed. Various graphs can be pinched and traced.

⑦System settings (optional)

SPEED_CUT_FILTER (Specify the target speed for driving data display in the range of 0.0 to 10.0)

LATITUDE (specify 1 if the current location is north latitude,-1 if the current location is south latitude)

LONGITUDE (specify 1 if the current location is west longitude,-1 if east longitude)

USE_STAND (true when using the main unit upright,false when using it lying down)

USE_LEFT (true if the left side is facing down/left,false otherwise)

HORIZONTAL (false when using the main unit in portrait orientation,true when in landscape orientation)

ACTION (service name of mock location service)

PACKAGE (package name of mock location service)

DEVICE_MAC (MAC address of SwitchBot thermo-hygrometer)

API_ID (API key for OpenWeatherMAP)

SCALE (specify the graph scale ratio in the range of 0 to 10)

SCAN_INTERVAL (Bluetooth scan interval (milliseconds))

SCAN_PERIOD (Bluetooth scan timeout value (milliseconds))

MEASURE_SWITCH (Specify the acceleration (G) at the start of measurement in the range of 0.0 to 0.5)

SPLINE (true if spline completion is used,false if not used)

ALPHA (Specify the noise cut of the sensor in the range of 0.1 (weak) to 0.9 (strong))

LOCUS (specify the view size of the running track from 100 to 400)