AnyScan209

In the state of the internal magnetometer sensor in the phone, you can easily scan magnetic fields of walls, ground, etc., and save its map. So, you can find iron in the ground or walls and, if your phone has an excellent sensor, you can also scan and map cavities, tunnels, and magnetic differences in the ground The program includes 3 pages: Scan, Create Scan, and Settings. You can switch between Scan and Create Scan with a swipe and access Settings via the settings icon. For balancing on the Scan page, long press the number displayed at the bottom. To create a scan on the Create Scan page, select your row and column, then name it and click the yellow folder icon On the Scan page, the volume button automatically starts the scan, and on the Create page, it changes the phone's volume. In the Settings page, if the detector is activated, the sensitivity level can be adjusted. The volume buttons on the monopod also take commands, so you can connect your phone to the monopod and scan Of course, on the Scan page in monopod mode, the back or negative zoom button activates single or automatic scan mode, and the positive zoom or forward button starts the scan. Description of the Scan page from left to right: Purple icon for saving scan and naming - Icon for 2D and 3D mapping - Icon for parallel or zigzag movement type - Gear icon for settings - Icon to enable/disable sound - Bluetooth icon - Icon to change color differentiation, with a long press in 3D mode to change surface differentiation - Icon to change the thickness of the top and bottom lines of the map and the background - Battery indicator icon for the external device. At the bottom of the page, the first bar shows the magnetometer balance level, and in front of it is the sensor's numerical value. To balance, you need to long press on this number until it reaches an approximate value close to 512 The next bar shows the scan number position, and you can move forward and backward without recording if needed. The three movement icons below are for moving the scan block forward and backward, and the middle icon performs three functions: in normal mode, it does single scan; with a long press, it switches to automatic; with each click, it starts scanning one row, and you need to start moving; with a long press, it returns to single scan mode The ave icon at the bottom averages the data with each click, and with a long press, it returns to the initial state. You can save this state by clicking the save icon With your phone, go to the Create Scan page. The icons from left to right are: the first icon, an orange empty folder, to open maps; the green extract icon, to export the map to the computer's visualizer software if needed; the next icons were previously introduced; at the bottom, the yellow folder icon for naming and creating the map; and below that, the length and width bars of the map and the red chain lock icon to lock the length and width, which, when clicked, allows free selection.By clicking on the gear icon, you can access the settings. From top to bottom:The Update label includes direct update or update via the apkpure market.The next label is for selecting the internal or external sensor. If you don't have an external device, you should use the internal sensor.Enabling the detector, which produces two sound tones in magnetometer polarity, and you can change the sensitivity using the volume button.Enabling vibration during scanning.Keeping the phone's screen on.Off-time label for the external device.Enabling the graph on the scan page with a long press on it, and with each regular click, you can switch between linear and logarithmic modes.Selecting the type of balance for the external device.Selecting the sensor gain.Selecting sampling with more samples for smoother and less noisy results, but for automatic and fast movement, it is recommended to keep it at the lowest.The last bar is your movement speed in automatic mode in each row forward or backward