Strategies & Tricks tying fishing line

1 Provide a leader's kenur (hooker) about 50 cm and kili-kili, enter the tip of the knob twice (2x), the short-cut tip +/- 15 cm. With the long side, wrap as much as 10x

2 Insert the tip into the bending slot. Hold the short side pull the long side until tightened

3 Conclude both ends in a split +/- 20 loop node

4 Create a gap in the center of the knot, then enter it from the kili-kilinya until meeting at the boundary of the first bond that tightens

5 Pull slowly on both ends, helping to flatten with your fingers tightly until here means that a 2-branch line can be produced. To create 3 branches and so on. Take the long kenur part, bend kenik conclude 3 ~ 5x

6 set the distance of this bond with the cauldron is shorter than the other side. Tighten the knot, cut it flat to just like the picture

7 Repeat the loop girder 20 windings as in (4) and insert into the crevice loops starting from the kili-kili until the boundary of the second tightening bond

8 Pull both ends slowly, align the tightening bond when necessary with the fingers. Until finally made a series of 3 branches

9 To make 4, 5 branches etc, use the leader's kenki longer and at the time to create a node like the picture

10 cut the kenur to produce short sides of about 15 cm and the rest into long sides to make the next branch

for more details how to tie the best fishing hook please download our application and get also facility offline hopefully useful.