VAGCAN Mobile

For VW with TP2.0 on Tiguan (NF) 5N1,5N2 1.8 / 2.0 TSI / TFSI EA888 series.

VAG CAN Mobile app.

The application works on Android 4.1+ devices with adapters: ELM327 Bluetooth, USB, WiFi.

The application is designed to work with original ELM327 adapters.

(performance with Chinese adapters is not guaranteed)

Recommended on-chip adapter: PIC18F25K80

The application is designed to diagnose VW vehicles with TP2.0 diagnostic protocol and under the UDS protocol of TRMS units, all-wheel drive clutches, as well as a number of engines.

Tested on Tiguan (NF) 5N1,5N2 (2006-2017) with 1.8 / 2.0 TSI / TFSI EA888 series engines.

Must work also with VW EOS, Passat 2006, Passat CC, Golf 2004, 2006 engine CCZA, CCZB, CAWB,

Audi A3 2004, Skoda Yeti 1.8 2012, as well as with other models of the VAG group that support this protocol.

Available in the application:

- reading and deleting errors for several auto blocks

- Diagnostics of the main groups of parameters for blocks: engine, automatic transmission and ABS.

The application provides the ability to record a general log and a log in .csv format

to view parameters using log viewers or as graphs.

To check the functionality of the application on your car, there is a free

demo version of VAGCAN Mobile application demo

For questions about the application, write to [email protected]

ECU 01 (ECM)

001, 003, 009, 014, 015, 016, 020, 021, 026, 031, 032, 053, 055, 060, 068, 070, 085, 093, 101, 103, 106, 107, 111, 113, 115, 118, 119, 120, 122, 131, 134, 135, 142, 159, 212, 220, 250

ECU 01 (ECM diesel)

001, 003, 004, 005, 007, 011, 013, 023, 100, 101, 105, 106, 108

ECU 02 (AT)

001, 002, 003, 004, 006, 010, 012, 028, 109, 128, 138

ECU 02 (DSG6)

011, 012, 016, 019, 030, 031, 064, 065, 109, 140, 141

ECU 02 (DSG7)

004, 005, 030, 091, 095, 096, 097, 111, 115, 116, 117

ECU 03 (ABS)

001, 003, 004, 005, 062

ECU 22 (AWD)

001, 002, 003, 004, 005, 006, 010, 011, 012

ECU 53 (Parking brake)

002, 003, 004, 005, 006, 007, 008

UPDATE:

v1.0.54

add OBD protocol

v1.0.29

added 1, 55, 250 engine groups

tab 4 groups the ability to increase the font

fixed error in air flow readings

1, 55 groups decoding statuses when you click on them

v1.0.27

added TDI 1.6 engine

v1.0.26

added DSG 6 gearbox

v1.0.12

added support CAVA for engine UDS protocol

added support for UDS protocol of TPMS block

v1.0.10

added 2 groups for automatic transmission

v1.0.9

added the ability to auto connect to the adapter

added remembering the selection of the last two groups

added section for rear brake pad replacement

v1.0.8

adding an indicator of connection to the ecu

adding multiple groups by engine

change the format of error codes for VW format

v1.0.7

error correction

v1.0.6

corrected formulas for external temperature and flow

simultaneous selection of two groups on the automatic transmission unit

selection of parameters for viewing and logging by Haldex5

selection of parameters for viewing and logging for CLJA diesel

v1.0.5

added parameters 015,016 gasoline engine group

added support for UDS protocol of CLJA engine

added support for UDS protocol of Haldex 5 drive

list of supported groups has been added to the Help section

displaying parameter names when selecting a group

v1.0.4

add ECU Parking brake

add ECU 4 Motion Haldex 4

v1.0.3

added parameters 003 gasoline engine group

added tab for diagnostics of diesel engines