밀폐구역알람 삼성중공업

How to use the closed area alarm Samsung Heavy Industries

This app shows the gas level in conjunction with the gas detector G-Tag.

Please turn on the G-Tag.

Install the smart gas detector application and run the app to allow permission.

When the gas reading is entered into the app, the reading will blink. (No separate pairing required)

Depending on the type of G-Tag, O2, CO, and H2S can be checked.

The battery is displayed in the upper right corner.

To send a text message to an acquaintance in case of danger, please add an emergency contact.

To check the details of dangerous situations, check the alarm history. The location is saved along with the gas value.

If you click the app name located in the top center, you can check the app information.

The app returns to the background.

caution

-It shows O2, CO, H2S in conjunction with the headquarters' G-Tag. You cannot use the app without the G-Tag.

-G-Tag is a low-power wearable gas detector that lasts up to 2 years without a battery charge.

- Receives data by Bluetooth. Please turn on Bluetooth.

- Receives Bluetooth data through many-to-many communication without pairing.

-Collect location information for beacon communication and sensor data storage.

-For smooth alert reception, it works in the background when using the app. If you don't need the app, please close the app completely.

-Alarm (vibration and sound) goes off when the headquarter's standard is exceeded to prepare for a dangerous situation.

-Set the media sound to the maximum value when running the app to make the alarm sound better in dangerous situations. If you are uncomfortable, please adjust the media sound.

-If the sensor data exceeds the standard value, a text message is sent to the person added to the emergency contact network. Please add a contact number to the emergency contact network for smooth texting. If there is no contact in the emergency contact network, text messages will not be sent.