ALPHA SECURITY

ALPHA SECURITY is the ALPHA SECURITY application that allows users to remotely manage the Unica, Dogma and One alarm control panels comfortably from their smartphone or tablet!

Through this application, the user can control various functions of the alarm system depending on the model of control unit installed. The Application provides for the control of up to 50 systems in Cloud, WEB, Tunnel or SMS mode.

The main features in the Cloud, WEB and Tunnel modes are listed:

- View the status, arm and disarm the individual areas of the system;

- Check for faults or anomalies;

-Check the presence and delete the alarm memory;

- View the status of the outputs and activate them;

- Take photos if there are sensors with a camera;

-Access the history of events, and view any associated photos;

- View the status of the system zones and possibly enable / disable them;

- View information on the SIM and the GSM signal level of the control panel;

The main features in SMS mode are listed:

- View the status, arm and disarm the individual areas of the system;

- View the status of the outputs and activate them;

- View information on the SIM;

Application working with all Android versions after 4.0 on both smartphones and tablets.

For connection to Cloud mode from the central alarm side, a permanent internet connection is required without the need to open doors.

For the connection in WEB mode from the central alarm side, a WAN connection is required. Router port to open: 8002.

For communication in SMS mode, the control unit must be equipped with a GSM communicator.

Firmware version required on the Unica control unit: 1.2.0.B121 or later.

The OnDemand functionality is only available for versions of Android equal to or later than 6.0.

Default pin: 12345