Aterm ホームネットワークリンク

This application is exclusive to NEC Platforms' Aterm series.

You can easily and comfortably manage your Wi-Fi environment from your smartphone.

▼Visualize and operate your home network (home network link function)

By registering the target Aterm with this application, you can check information about the Aterm and connected slave devices (such as computers).

You can also reboot Aterm, update firmware, and change wireless channels.

▼Information on how to solve poor radio waves (home network link function)

The app will show you where the wireless connection is malfunctioning and provide you with solutions.

▼Various Aterm settings can be made from a smartphone or tablet device (Aterm settings assist function)

You can configure/manage your home Aterm while connected to Wi-Fi.

Search for Aterms in your network and display links to each feature page.

*To use this feature, the terminal you use and Aterm must be connected to the same network.

▼Visualize Wi-Fi signal strength/communication status (heat map function)

You can visualize Wi-Fi signal strength and communication status using the heat map function.

It can also be used with routers made by other companies.

*Radio wave strength and communication status cannot be measured at the same time.

*To use Wi-Fi communication status visualization, you need two smartphones with this app (ver 3.0.X or higher) installed.

The first smartphone is used as a speed measurement server and the second smartphone is used as a speed measurement client to measure the communication speed via a Wi-Fi access point. (This is a communication measurement between devices within the LAN, and is not the result of measuring internet speed. Communication speed is affected by the performance of the smartphone and the connected Wi-Fi standard.)

*To use this feature, the terminal you use and Aterm must be connected to the same network.

▼Notice information from Aterm via push notification (push notification function)

If there is a notification from Aterm, a push notification will be sent to this application.

▼Supports initial settings (initial settings wizard function)

For routers that support the initial configuration wizard function, you can perform the initial configuration up to connecting to the Internet.

*Please see AtermStation (URL below) for compatible Aterm series.

　https://www.aterm.jp/product/atermstation/special/home_network_link/

▼Providing information about Aterm

We will receive and notify you of various information regarding Aterm, such as coupon notifications.

▼Equipped with other functions

- You can manage Aterms in multiple locations as a group.

・You can display the network diagram.

*If you are using Aterm WX3600HP as the base device, you cannot display the network diagram.

[Compatible versions]

Android 11.0 or higher

[Compatible Aterm series]

Aterm AX1800HP (ver1.1.4 or later. Mesh Wi-Fi function must be enabled.)

*For other compatible Aterm series, please see AtermStation (URL below).

　https://www.aterm.jp/product/atermstation/special/home_network_link/

[Notes]

- Account registration is required to start the home network link function.

You can delete your account below.

https://www.aterm.jp/delete_hnlid/login.html

・During the initial settings, it is necessary to connect the smartphone to the same network as the target Aterm.

・When you create a new account, the system will send you an email containing an identification verification code.

You may not be able to receive this email if you have implemented anti-spam email protection on your device.

Please be able to receive emails from [email protected].

・In rare cases, it has been reported that if you register a group name, device name, or handset name using characters other than half-width alphanumeric characters, you will not be able to log in to this app. We recommend registering using half-width alphanumeric characters.

[Operation confirmed model]

・Xperia 1 II

・Galaxy S10+

・AQUOS R6

・AQUOS R8

[New feature]

- Added initial setup wizard.

-Improved some operations.