Aterm らくらく設定アシスト for Android

By reading the "Raku-Raku QR Start QR Code" attached to the product with the app, you can easily set up a Wi-Fi connection between your smartphone/tablet and the Aterm series main unit.

The "QR code for QRaku QR Start" encrypts information such as the network name (SSID) and encryption key (password), so it is not only easy to operate, but also secure.

In addition, APN (connection destination) settings for data communication with SIM can be easily set by selecting the contracted SIM service from the list.

[Supported version]

　Android 13.0/12.0/11.0/10.0/9.0/8.1/8.0/7.1/7.0 devices compatible with Google Play.

* Android version Easy Setting Assist Ver1.1.0 or later is not compatible with devices below Android 7.0.

[Connection confirmation model]

・Smartphone terminal

AQUOS PHONE ZETA (SH-01H)

GALAXY S7 edge

GALAXY S8+ (SCV35)

Galaxy A41

isai vivid (LGL32)

Nexus 5X

Xperia Z3

Xperia X Performance (SOV33)

Xperia 1 SOV40

Pixel 3a

WIKO Tommy3 Plus (W-V600)

Rakuten Mini

ASUS ZenFone 5

AQUOS sense2 SH-01L

arrows U 801FJ

arrows We F-51B

Xperia 1II

Galaxy A22

Pixel 6a

[Aterm compatible models]

　Aterm HT100LN/Aterm HT110LN

【Notes】

・The attachment location of the "Rakuraku QR Start QR Code" used for reading differs depending on the product. Please check the attachment location in the instruction manual of each product.

・The QR code may not be recognized with a camera that does not have an autofocus function or a camera with a low resolution.

・When using the enlarged display function of a smartphone or tablet, the display of the QR code reading frame in the camera view screen may be shifted from the center of the screen. Please run this application again after returning to normal display.

・If it is difficult to read the QR code with the camera of your device, please try the following.

　　－Adjust the position of the camera so that it is perpendicular to the QR code.

-Adjust so that the ceiling lights, etc. are not reflected in the QR code when it is read.

- Read in a bright place. (Avoid places that are too bright such as direct sunlight.)

・Aterm's SSID and encryption key can be set with the initial values. It cannot be set if it has been changed from the initial value.

・Please make sure that the firmware of Aterm to be connected is the latest. Please upgrade if it is not the latest version.

・If the QR code cannot be recognized or the application cannot be downloaded, please set up Wi-Fi manually from your smartphone/tablet. Please refer to the manual of Aterm for detailed setting method.

・Depending on the Aterm you are using, the carrier of the contracted SIM service may not be included in the APN (connection destination) list, or the list may not be displayed. In such a case, please set the Wi-Fi manually from your smartphone/tablet. Please refer to the manual of Aterm for detailed setting method.

・If you cannot set the APN (connection destination), please set the Wi-Fi manually from your smartphone/tablet. Please refer to the manual of Aterm for detailed setting method.

・When inquiring by e-mail, please set your e-mail filtering settings so that "[email protected]" can be received. Also, please understand that we may not be able to answer inquiries other than this application.

*QR code is a registered trademark of DENSO WAVE INCORPORATED.

*This product includes software developed by the OpenSSL Project to utilize the OpenSSL Toolkit.