Comando Relè

The app allows to turn, via the Internet, any load connected to the electrical network, such as car alarms, garage doors, lights, doors, hydraulic pumps, electric household appliances and any other electrical device.

You need to purchase an ignition device (relay) on the website www.kmtronic.com; the relay is to be fed with power supply to 12v and connected to the network (ADSL routers or network switches) via cable or WiFi; you do not need the PC using.

The relay (2 channels) has 2 outputs with which it can operate two electrical devices.

The application configuration is simple: you must specify the IP address and port which will be connected to the relay.

If the use is external to the network on which it is connected, the relay will then be shown the IP address PUBLIC (to know your IP address PUBLIC open, from any networked PC, the website http: //www.mioindirizzoip .com

The DOOR to be shown will be the one configured in the router.

Usually the relay is provided with the IP address 192.168.1.199; open your ADSL router with an internet browser, and settings (virtual server) to indicate a port (es.5454) and make it match the IP 192.168.1.199

In the app configuration indicate the username and password provided with the relay (usually admin admin).

The application can be configured to operate any electrical devices with the following options:

Button - pressing once the ignition key, the relay is switched on and after a few moments turns off automatically; This option is recommended for opening gates or garage.

Switch - pressing the button activates the relay; pressing it again will turn off the relay.

timed switch - pressing the button the relay is activated for a programmable number of minutes (from 1 to 60 minutes); these past minutes, the relay switches off.

Switch Timer - this option activates the relay from a certain time and off at the end of time (eg. From 18:00 to 20:00).

The application is suitable for the control of 2-channel relay.

To configure the application, when logged in CONFIG menu slide your finger from right to left.

**********

From 4.5.2018 version is available at 4 and 8 channels with ability to specify different IP for the relays.

IMPORTANT*******

For those who have already installed the application before May 3, 2018 to operate the current version must UNINSTALL the old version and INSTALL AGAIN.

NO PUBBLICITY