DIY Survey

Pitch Angel

Place you phone sideways on a surface and you will be able to determine the angel of the slope.

Useful to check slop angles i.e. Roofs, floors.

Bubble Level

Place you phone flat on a surface to check if the surface is level.

Useful to install i.e., cabinets, counters and any flat surface.

Land Survey function

How to use:

Measure area you want to survey in meters

Enter the length and width in the text box blocks and press calculate

Place phone on ground starting at the left corner of the area

Press button one, this is your base point and will give you a number and turn green

Now in increments of a meter, place phone on ground and press the following number button

You will note that the numbers will change and that the button will turn green, red or blue

Green = Height is same as base point (starting point)

Reg = Lower than base point, by mm increments

Blue = Higher that base point, by mm increments

Complete the survey

In the bottom menu press PDF Survey to convert your survey to PDF, to save or share your survey