ESMART® Configurator

ESMART® Configurator — an application that makes ESMART® Reader configuration and management process easy, without dismounting from the wall.

Configure you reader with three steps:

1) Create a configuration inside an application for your reader model or write an email to help@esmart.ru, in a free form describing the requirements for the settings that you want to change for the desired reader model.

2) Tap on configuration file you just created or imported from ESMART® technical support specialist

3) Apply Configuration:

With NFC:

— Write the configuration to a Master Card using NFC, by pressing an Apply button on the right top of the screen. Card will store the configuration

— Tap a Reader with a Master Card for 2-3 seconds to enter a Configuration Mode

— Tap a Master Card again to Apply configuration

— Wait till the reader to be configured

OR

Using Bluetooth:

— Apply the configuration to the reader using Bluetooth, by pressing an Apply button on the right top of the screen and then pick Into reader via Bluetooth

— Bring the phone close to the reader until you see Present the Master Card request

— Tap a Reader with a Master Card for 2-3 seconds to enter a Configuration Mode

— Press Configure button on the right top of the screen to Apply the configuration

— Wait till the reader to be configured

In case something went wrong or the configuration cannot be imported into the application, contact a technical support specialist — we will certainly help to understand the situation.