Geeni Security Camera AppGuide

Geeni Security Camera App Guide - The Look 1080p Smart Wi-Fi Security Camera joins the Geeni family of smart home devices which also includes a selection of smart light bulbs and smart plugs. This small, flexible security camera delivered sharp 1080p video in our tests and was a snap to install, but its audio quality leaves something to be desired

The matte black, puck-shaped Geeni Look camera housing is 2 inches wide, 1.2 inches thick, and sits atop a thin stem with a 2-inch round base

The Look captures video at 1080p and has a 120-degree field of view. It uses an infrared LED to provide black-and-white night vision video, and has a microphone and speaker for two-way audio. The camera is equipped with an 802.11n radio for connecting to your 2.4GHz Wi-Fi network and contains motion and sound sensors. A micro USB port on the base is used to power the camera with the included power adapter and 39-inch cable, and there's a reset button on the back. The Look will save motion- and sound-triggered video to your phone, and if you install a microSD card (not included) in the slot on the right side of the camera, it will continuously record video that you can view using the app's timeline.

The camera uses the same mobile app as other Geeni devices, such as the Lux bulb and the Spot plug. It opens to a home screen with that shows the local weather conditions and tabs for any active Scenes (Scenes allow you to control multiple devices with a single tap). Below these are tabs for each installed Geeni device. Tap the Look camera tab to open a live stream that can be viewed in full-screen mode by turning your phone sideways. Here you'll find buttons for two-way audio, manual video recording, taking a snapshot, and playing back recorded video. There's also an Alarm button that takes you to the Motion Detection Settings screen where you can enable/disable motion detection and set motion sensitivity. Tap the three dots in the upper right corner to enable sound detection and set sound sensitivity levels, format an SD card, update firmware, and check Wi-Fi signal strength.

The Smart Scenes button at the bottom of the My Home screen takes you to a page where you can create Scenes and Automations. Automations allow the camera to react to things like temperature, humidity, and sunrise and sunset times. You can also have it interact with other Geeni devices, but these integrations are limited. You can have a Geeni Spot plug turn on or off when the camera's sound or motion settings are enabled or disabled, but it won't react to sound or motion triggers, which would make more sense.

In Geeni Security Camera App Guide app :

a. geeni camera app android

b. geeni camera app bluetooth

c. geeni camera app connect

d. geeni camera app desktop

e. geeni camera app ios

f. geeni camera app ipad

g. geeni camera app laptop

h. geeni camera app pair

i. geeni camera app pc

j. geeni camera app reset

k. geeni camera app setting

l. geeni camera app setup

m. geeni camera app tab

n. geeni camera app wifi

o. geeni camera app windows

p. geeni camera app windows 10

q. geeni camera app windows 11

r. geeni camera app windows 7

s. geeni camera app windows 8

t. geeni camera app windows xp

u. geeni camera web access

v. geeni hawk 1080p indoor/outdoor security camera

w. geeni hawk 3 hd 1080p outdoor security camera

x. geeni hd 1080p smart wi-fi security camera 2-pk

y. geeni hd 1080p smart wi-fi security camera review

z. geeni indoor security camera

1. geeni look 720p smart wi-fi indoor security camera

2. geeni security camera app

3. geeni security camera canadian tire

4. geeni security camera login

5. geeni security camera offline

6. geeni security camera reviews

7. geeni security camera sd card

8. geeni security camera walmart

9. geeni sentry floodlight security camera

10. geeni sentry smart floodlight & 1080p hd security camera

11. how to set up geeni security camera

12. view geeni camera on pc

etc.