HvacCalc

HVAC Calc - your toolbox for HVAC-Quality assurance.

HVAC Calc is the app that performs calculations for the professional, whether you are a craftsman or a consultant. At a few keystrokes, the app provides pipe dimensions for ventilation, stormwater, floor heating, water and drainage.

Calculations and documentation of calculations can be made in a short period of time

The app is designed to be used in:

- early phase and development of project

- detailed design

- final inspection and after-check

Using the copy feature, projects similar to each other can easily be copied and you dont need to re-entering all the values.

Completed reports can be sent by e-mail as documentation to builders, homeowners, colleagues, employees in the project and so on.

User Manual:

1- Create a new project, or select existing.

2- Start new calculation or select existing from the list.

3- Select the type of calculation

TubeDim guide:

1. Select building type.

2. Select pressure on the water supply in the gate and at the stopcock, as well as distance into the building and height of the highest equipment.

3. Select the number of equipment and possible simultaneousity.

4. Select pipe types and fall.

5. Press the report button.

6. Review the report.

7. Check out any error messages

8. Check whether synchronization must be selected or if standard coincidence can be used

9. Tap the email symbol and get a copy of the report by email.

Channel calculator:

1. Select the channel type rectangular or round

2. Select A, B, V and Temp for rectangular channels.

3. Select D, V, and Temp for Round Channels.

4. Values are calculated on a continuous basis.

DuctDim guide:

1. Select the number of persons, activity level, area, airflow per m2, ceiling height number of channels and max speed per. channel.

2. Values for total airflow, airflow per. person, calculated CO2, airflow per. channel, channel dimension, channel speed, pressure drop in channel, room volume and air switches per. hour is calculated on a continuous basis.

Stormwater guide:

1. Select the type of tube

2. Select surface roof / asphalt / gravel / grass

3. Select the size of the area

4. Select fall and rain intensity

5. Dimensions, amount of water and utilization rate on pipes are calculated on a continuous basis.

Floorheating-guide:

1. Select room temperature

2. Select area, can either be entered or calculated by pressing "..."

3. Select turn temperature and return temperature

4. Select the inner diameter of the pipe

5. Select a distance and number of courses

6. Check error messages and make changes until you receive no error messages

7 send report

Energy Well-guide:

1. Select heated area

2. Select power requirement

3. Select the proportion of power to be covered by the heat pump (usually 50-60% of total power requirement, this covers 85-95% of energy requirements)

4. Select SCOP on heat pump

5. Select heat sink from well (normally 20-30 W / m) always check with well drillers

6. Select depth to mountains and number of wells

7.Select the free radius (distance between the wells)

In order to use HvacCalc over the 7 day trial period, a subscription must be purchased. Payment for the subscription will be charged to you through your Play Store account.

If you do not cancel your subscription at least 24 hours before the end of the subscription period, your subscription will automatically renew. The renewal will be charged to your Google Play Store account within 24 hours before the end of the current subscription period.

Subscriptions can be managed by the user in the Google Play Store on the device. Automatic renewal can be turned off by accessing the Google Play Store profile. When subscribing is purchased, any remaining trial period will be deleted.

Privacy Policy: https://starteam.no/privacypolicy.html

User Agreement: https://starteam.no/termsofuse.html