My ESP32Tag (ESP32 + UWB)

*** Please Note ***

This app must have hardware (ESP32Tag) to work. If the hardware is not ready, the app cannot be used.

**Helps you find your own ESP32Tag**

This application communicates with my ESP32-UWB device via USB-Serial. Two UWB devices work as a pair. The anchor device is connected to the phone, and the distance from the tag device is calculated and displayed on the screen. Because it uses UWB(Ultra Wide Band chip), you can measure the distance between two devices.

These are the projects I did with ESP32 and UWB. This will help prepare your hardware.

[ESP32Tag & Anchor Device Source Code]

https://github.com/0015/ThatProject/tree/master/ESP32_UWB/2_My-ESP32Tag-App

[My ESP32 Tag App for my own ESP32Tag Device!]

https://youtu.be/vaYJydZcObU

[ESP32 + UWB | Not AirTag, But ESP32Tag]

https://youtu.be/_Bu3lw49m5s

[ESP32 + UWB | How far can it go?]

https://youtu.be/sv6oUdYyay4

[ESP32 + UWB | Warning sounds depending on the distance]

https://youtu.be/xrDvu8QT1Qs

[ESP32 + UWB | Indoor Positioning + Unity Visualization]

https://youtu.be/c8Pn7lS5Ppg

[ESP32 + UWB + IMU | Indoor Position & Rotation + Unity Visualization]

https://youtu.be/fPuxcjHsfpc