Q-Check

■ Smartphone function test completed within 5 minutes!

■ Press the start button once to perform all the tests at once!

[main function]

1. Bulk inspection

Click the "Start" button to check the items by speaker, microphone / handset, battery, WiFi, cellular, Bluetooth, GPS, vibration motor, various sensors, front / rear camera, each button, touch screen and earphone jack. . (Inspection items may vary depending on the type of smart device.)

2. Individual inspection

You can check individual items that you want to check again after batch inspection.

[How to use]

1. Connect to the Internet via Wi-Fi or cellular.

2. If you are testing a model with an earphone jack, prepare earphones in advance.

3. Click the Start button to proceed with the batch check.

4. If there is an item that you want to re-scan by item, select individual items on the screen.

5. If you want to send the test result, click the "Send Test Result" button to send the test result and the "Test Result Code" will be issued.

6. "Test Result Codes" can be viewed on the website to be used as a code for inquiring test results from the vendors who want to use the test results of this app.

[Access Rights Guide]

Camera: Used to check camera performance

Speaker / Microphone: Used for speaker / microphone performance test

Location information: Use for network inspection

Wi-Fi: used for network testing

Bluetooth: used for network testing

Photo: Use for button inspection

----

[Access Rights Guide]

■ Required access permissions

Camera: Used to check camera performance

Speaker / Microphone: Used for speaker / microphone performance test

Location information: Use for network inspection

Wi-Fi: used for network testing

Bluetooth: used for network testing

----

Developer contact:

Address: 35, Jangneung-ro, Gimpo-si, Gyeonggi-do, Korea

Contact: [email protected]