USB Serial Terminal

Simple USB Serial Terminal for Serial Port Communication over USB-OTG

INTRODUCTION:

- One-of-a-kind App that gives you compatibility with Serial Devices like CP210X, FTDI, PL2303, CH34X and CDC/ACM devices.

- This app can send and receive commands via Serial Devices so you can debug your hardware problems easily.

- Connect your Serial Devices to Mobile using OTG-Cable.

FEATURES:

- Baud Rate, Data Bits, Parity Checks, and Stop Bits setting Option

- Separate panels for sending and receiving data.

- Custom your own buttons for frequent sending of same data.

- Monitoring receiving data as ASCII or HEX.

- Sending Data as ASCII or HEX.

- Selection for \r \n at the end of sending data.

- Simple copy option in sent data just long press on data.

- Send Log file of Received and Sent data.

- Keep Screen on/off option.

- Font Size option.

- Remove Ads option.

NOTE:

- Android device must support USB Host mode.

- By default, Received data in ASCII format and It can be changed from top MENU.

- By default, Data sent in ASCII format and It can be changed from long pressing of particular Button.

- By default, \r\n will be sent on every sending data and It can be changed from long pressing of particular Button.