VIBRO-LASER Pro

VIBRO-LASER Pro app: the world’s first and only multi-operating system laser shaft alignment system. Quickly and easily perform precision horizontal and vertical shaft alignment with your Android, iOS, or Windows device.

Base kit:

- The 9-12-3 o'clock method is the basic method for taking measurements;

- Take measurements at any three positions of the shaft rotation at least by 20 degrees;

- Measure and align vertical and flange machines;

- Soft foot check option;

- The averaging filter reduced the influence of external visual challenges such as lighting, steam, and other visually impairing variables while taking measurements;

- Thermal growth expansion of machines.

Advanced features:

- SMARTSPIN™. The measured values are automatically recorded during shaft rotation. With hundreds of points registered, you can start measuring at any shaft position.

- SMARTPOINTS™. This multipoint method allows you to record an unlimited number of points at any sector of the shaft circumference.

- SELECT COUPLING TYPE. This option allows you to specify the coupling type used for shaft connection – i.e., short flex or spacer shaft.

- CARDAN/OFFSET MOUNTED MACHINES. This option is specially designed for alignment of cardan and offset mounted machines. You will need an additional Cardan bracket kit to do the job.

- MACHINE TRAIN. Enable this option and align shafts of up to five machines that are connected together.

This software is designed to work with VIBRO-LASER measuring units at least 3.7.4. If the version of the measuring units is lower than the installed one, please contact distributor in your region.