EXPUTT RG

[summary]

The Output RG App (hereafter 'eApp') is an application program that connects the Output RG device (hereinafter 'eDevice') through a Wi-Fi network, receives measurement information from the eDevice, and drives the putting simulator.

The eApp runs alone and cannot practice putting, it requires an eDevice product. The eDevice is a product that includes more practice tools than the eApp, and it is a product that allows you to practice distance on flat greens and practice slopes and play games on greens modeled on real greens. eApp is a specialized application program that enables the distance practice mode included in the eDevice to be run on a mobile device (hereinafter 'mDevice').

[Supported languages]

Korean, English and Japanese are supported.

[Practice function]

1. Change green speed

2. Various distance change modes

3. Forward slope setting

4. Set the left and right inclination

5. Tempo sound output (0.7~1.4 sec)

6. Accuracy statistics by distance section

[Preparing to connect the eDevice]

1. The eDevice must be connected to a Wi-Fi network.

2. The mDevice must be connected to the same Wi-Fi network as the eDevice.

[How to connect eDevice]

1. Power on your eDevice.

2. After the LED of the eDevice turns green, press the 'Mode Change' button on the remote control for 3 seconds.

3. Check that the LED on the eDevice is blinking blue. If the LED of the eDevice blinks yellow, WiFi is not connected, and the connection is established within 1 minute and the LED changes to blinking blue.

4. Launch the eApp to connect with your eDevice.

* More information can be found on the Output RG homepage.

* https://www.exputtgolf.com