New DIY Wooden Frame Photo

There are so many free printables available now that it would be easy to find one that’s perfect for every single room is your house. What’s a little more difficult is finding cool frames that don’t cost much, especially for a large print. in this application will help you to make figura photo in your home without spend your money but look elegant and glamour.

Step 1. we used a 4 inch wide pine board from Home Depot (which is actually about 3.5 inches wide). we got the 8 ft length for a frame for a 16×20 print. we used a miter saw set at 45 degrees to miter the corners. When cutting your pieces, remember that the short side (inside) of each board should be about an inch shorter than the height or width of your print. For a 16×20 print.

Step 2. The exact dimensions are not that important; however, it is important that both long pieces are exactly the same lenght, and both shorter pieces are exactly the same length. This will ensure that your mitered corners line up perfectly. we accomplished this by sawing through both pieces at once on the miter saw.

If you don’t have a miter saw, don’t worry. You can just make a frame without mitered corners.

Step 3. To put your frame together, you’ll need wood glue and some sort of joiner. we’ve seen v-nails recommended, but we couldn’t find them at Home Depot. You could also use a metal brace that you screw into the pieces you’re attaching together. we were looking for something inexpensive and convenient.

Step 4. we used a lot of wood glue, pushed our pieces as close together as possible, and asked one of my boys to hammer in a couple of joiners across the seam. we put heavy books on it to make sure the corners all laid flat and left it to dry for a couple of hours

Want to know more ?

Download this application now and get what you want here. worth to try and you will like it.

simply share through any social media platforms. thank you for downloading. please enjoy and give us any feedback.