NTC Control LITE

The application is required to provide limited access to devices.

ATTENTION!

For correct operation, you need to update the firmware and device configuration. Contact technical support at [email protected]

The app supports devices:

S-20xx

S-24xx

S-26xx

S-46xx

Possibilities:

- View telemetry and unload telemetry from the built-in memory of the device.

- Synchronization of device time with smartphone.

- Uploading the downloaded telemetry to the server from a smartphone.

How can I connect to the tracker?

- via USB interface;

- via Bluetooth;

- via the Internet (using the RCS service).

Permissions that the application can request:

- "Your location" is a required permission, without it the application will not function correctly. Access is needed to ensure work with the Bluetooth module of your smartphone; without it, working with devices via Bluetooth will be impossible.

- "Memory" is a mandatory permission, without it the application will not function correctly. Access is needed to save firmware files, configurations, tmi files, as well as application settings to the smartphone.

- "Contacts" is an optional feature, you don't have to grant permission. Access to the list of contacts provides an additional function of displaying your notebook when connected to the device via the "Internet" channel.

General recommendations:

- if your application does not "see" devices via Bluetooth (but devices are visible in the Bluetooth settings of the phone itself), then check that you have granted the application permission to determine your location, and also enabled the location function in the smartphone settings.